• nonentity@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    0
    arrow-down
    2
    ·
    7 hours ago

    The modern incarnation of ‘Cable’ is HFC, Hybrid Fiber Coax, and has been for more than 3 decades, and being analogue fiber, technically has greater data carrying capacity than digital variants.

    It really depends on how petulant you want to behave, and interfacing with anything that smells of a legal system is as efficient and effective as passing a MPEG2 stream through a HFC node.

    • ceiling@quokk.au
      link
      fedilink
      English
      arrow-up
      3
      ·
      5 hours ago

      The internet backbone is fiber. Comcast and Spectrum advertise their cable networks as “fiber powered” to capitalize on the word “fiber” even though the local distribution is all cable. By that same logic, dial-up and LoRaWAN are fiber powered, too.

      AT&T internet is expensive af and I’d never recommend it over competitors, but they are right here. It’s intentionally misleading to the point of false advertising.

      AT&T will run a fiber line into your home that terminates at your router. These “fiber powered” networks won’t put fiber within miles of your home.

      • nonentity@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        1
        ·
        4 hours ago

        Except for nodes extremely close to a HFC hub or head end, the overwhelming majority of the distance traversed through a HFC plant is over literal, optical fiber strands, and with remote PHY equipment the footprint of glass is only expanding. Also, for RF clarity reasons, the termination of the fiber in the street is almost guaranteed to be under a mile from the modem in the premises.

        Extending this to claim connections feeding an access network implies the same logic indicates a bad-faith argument.

        I have no interest in the legal or marketing aspects of this discussion, but from a purely technical standpoint, it’s entirely accurate to claim that HFC truly is fiber powered, and given the analogue lasers involved, there’s a hell of a lot more power fed into those fiber strands.

        • ceiling@quokk.au
          link
          fedilink
          English
          arrow-up
          1
          ·
          3 hours ago

          the termination of the fiber in the street is almost guaranteed to be under a mile from the modem in the premises.

          Huh, TIL the fiber terminates closer than I thought. Though I maintain that a connection is only as good as it’s weakest link so 5 miles vs 1 is irrelevant, even if a shorter cable run provides a stronger connection.

          IMO, the connection ISPs are selling are ISP to modem, so whatever the weakest link is between those two is the network you have. I’m saying that if you take the term “fiber powered” for its literal meaning, then you could argue that because the internet itself is fiber powered, then literally any network connecting to it could be pedantically construed to be “fiber powered”. IMO it is not any more grammatically disingenuous for ISP to run fiber up to your street, send it to your modem via LoRa, then claim that the connection is “fiber powered” than it is to do the same but with coax. Both use the same amount of fiber.

          Companies are using the term “fiber powered” to maintain plausable deniability while preying on the less tech literate that just see fiber and think “better”.

          Though, practically speaking, for 99.99% of people the difference is inconsequential anyway. I personally am on an HFC network and I prefer it over fiber because it performs well, I don’t need 10GB speeds, and AT&T charges 3x the price for a true fiber connection. Though, if the price were equal, sure true fiber would be cooler.