• rumba@lemmy.zip
    link
    fedilink
    English
    arrow-up
    36
    arrow-down
    1
    ·
    7 days ago

    You could put em on the moon with a heatpump into the ground.

    The cost per pound to get them there is insane.

    They are seriously old in 2 years.

    They could put them in deserts here with closed loop cooling.

    or… hear me out… Maybe we DON’T NEED THAT MUCH AI…

    • mkwt@lemmy.world
      link
      fedilink
      English
      arrow-up
      6
      ·
      6 days ago

      You could put em on the moon with a heatpump into the ground.

      The interior of the moon is not super cold. You could still run a heat pump, but I don’t know what the conductivity is like.

      • rumba@lemmy.zip
        link
        fedilink
        English
        arrow-up
        2
        ·
        6 days ago

        “Near” the surface, it’s apparently around -21C, but its one crazy trick is surface area for heat sync. Once we start pushing heat into it, we’d have to do it in a REALLY huge surface area. Moon trenching…

        • mkwt@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          6 days ago

          If you read the chart on that Wikipedia article carefully, the estimated temperature profile is based on data from two Apollo missions.

          All of the Apollo missions spent all of their surface time during the lunar morning, relatively early into the 14-day lunar day. They did this partially because the cooling systems couldn’t cope with the full heat of the day, and partially to ensure good backlighting during the landings.

          So there is going to be some “diurnal” surface heating and cooling that is probably modeled but not measured.