You have remote power management set up for the systems in your homelab, right? A server set up that you can reach to power-cycle other servers, so that if they wedge in some unusable state and you can’t be physically there, you can still reboot them? A managed/smart PDU or something like that? Something like one of these guys?
Oh. You don’t. Well, that’s probably okay. I mean, nothing will probably go wrong and render a device in need of being forcibly rebooted when you’re physically away from home.
if you can cycle your home assistant with the shelly plug whilst your home assistant is down, yes. from experience it’s really quite annoying to have a smart plug switch off HA…
HA is on the same proxmox host as the router. So yeah I can end up locked out. Hasn’t happened yet tho!
The relay is on my test machine, it’s always nvidia that crashes there.
You have remote power management set up for the systems in your homelab, right? A server set up that you can reach to power-cycle other servers, so that if they wedge in some unusable state and you can’t be physically there, you can still reboot them? A managed/smart PDU or something like that? Something like one of these guys?
Oh. You don’t. Well, that’s probably okay. I mean, nothing will probably go wrong and render a device in need of being forcibly rebooted when you’re physically away from home.
I built an 8 outlet version of those with relays and wall outlets for… a lot less.
Does a $12 Shelly plug count?
if you can cycle your home assistant with the shelly plug whilst your home assistant is down, yes. from experience it’s really quite annoying to have a smart plug switch off HA…
HA is on the same proxmox host as the router. So yeah I can end up locked out. Hasn’t happened yet tho! The relay is on my test machine, it’s always nvidia that crashes there.
An 8 switch relay, old Pi, and 8 hardware store outlets can be had for not much more. I did that and let PiKVM control my outlets directly.
This is the back of my 10" rack before it was cleaned up. Lots of custom work on this that I’ll be posting a page on my site about when complete.
@tal@lemmy.today in case you are interested